THERMO-FLEX FOAM & ROOF COATING SYSTEM
We’ve Got You Covered
THERMO-FLEX FOAM & COATING SYSTEM is an economical and effective roof coating system for application over new and existing roof substrates.
In re-roofing applications the THERMO-FLEX FOAM & COATING SYSTEM eliminates costly "tear-off," land-fill fees, interior exposure and down time.
No other Foam & Coating System protects, preserves, and prolongs the life of commercial and residential roofs with the same standard of excellence and performance as the time-tested and proven THERMO-FLEX SYSTEM.
Whether the right choice for you is 100% Acrylic TF 1000 , TF 750 or TF 500 rest assured the THERMO-FLEX technology, with years of proven reliability, will provide you the cost savings and performance you require.
Spray Polyurethane Foam (SPF) is widely recognized as an industry standard, and continues to surpass expectations for cost-savings, durability and longevity while adding these valuable benefits:
- Meets requirements for California Title 24
- Provides a seamless umbrella over new and existing roof substrates
- Best insulation value per inch
- 100% adhesion
- Self-Flashing
- Slopes to drain
- System is lightweight
- Sustained performance
- It’s RENEWABLE
- 60 Years of Proven Performance
THERMO-FLEX Foam & Coating System provides a complete program designed to protect, preserve, and prolong the life of both commercial and residential roofs.
THERMO-FLEX PRODUCTS ACRYLIC COATING SYSTEMS
TF 250
Thermo-Flex 250 is a technologically advanced, thixotropic, acrylic, elastomeric coating uniquely formulated for the protection of polyurethane foam insulation. Thermo-Flex 250 is designed to withstand the intense heat and ultra-violet rays of low humidity desert environments.
Colors: White, Gray, Tan
TF 500
Thermo-Flex 500 is a technologically advanced, economical solution, thixotropic, acrylic elastomeric coating uniquely formulated for the protection of polyurethane foam insulation. Thermo-Flex 500 is designed to withstand the damp heat and ultri-violet rays of humid environments.
Colors: White, Gray, Tan
TF 750
Thermo-Flex 750 is a technologically advanced, high solids, fire retardant, thixotropic, acrylic elastomeric coating uniquely formulated for the protection of polyurethane foam insulation. Thermo-Flex 750 is designed to withstand the intense heat and ultra-violet rays of low humidity desert environments.
Credentials: UL, CRRC, EnergyStar, TITLE 24, Florida Building Code, Cal. Fire Marshall
Colors: White, Gray, Tan
TF 1000
Thermo-Flex 1000 is a technologically advanced, high solids, fire retardant, thixotropic, acrylic elastomeric coating uniquely formulated for the protection of polyurethane foam insulation. Thermo-Flex 1000 is designed to withstand the damp heat and ultra-violet rays humid environments.
Credentials: UL, Miami Dade, CRRC, EnergyStar, TITLE 24, Florida Building Code, Cal. Fire Marshall
Colors: White, Gray, Tan
TF 1000QS
Thermo-Flex 1000QS (quick set) is a technologically advanced, high solids, fire retardant, thixotropic, acrylic elastomeric coating uniquely formulated for the protection of polyurethane foam insulation. Thermo-Flex 1000QS is designed to withstand the damp heat and ultra-violet rays of low humidity desert environments. Use Thermo-Flex 1000QS (quick set) formula when humidity happens before or after light rain occurs.
Credentials: UL, Miami Dade, CRRC, EnergyStar, TITLE 24, Florida Building Code, Cal. Fire Marshall
Colors: White, Gray, Tan
TF 1000FS
Thermo-Flex 1000FS (fast set) is a technologically advanced, high solids, fire retardant, thixotropic, acrylic elastomeric coating uniquely formulated for the protection of polyurethane foam insulation. Thermo-Flex 1000FS is designed to withstand the damp heat and ultra-violet rays of high humidity environments. Thermo-Flex 1000FS (fast set) can also be applied in conditions where impending hard rain is due within 30 minutes, and in areas of high humidity.
Credentials: UL, Miami Dade, CRRC, EnergyStar, TITLE 24, Florida Building Code, Cal. Fire Marshall
Colors: White, Gray, Tan
Thermo-Prime
Thermo-Prime Acrylic Roof Primer is a single component, water based, acrylic primer that promotes adhesion of spray-in-place polyurethane foam to a variety of roofing substrates including BUR, modified bitumen, concrete, masonry, galvanized metal and wood. The water based formula eliminates odor problems normally associated with solvent borne primers.
Thermo-Caulk
Thermo-Caulk Coating Systems is designed from 100% acrylic resins. It is a single component, water-based, high performance, elastomeric sealant. It is a knife-grade caulking that when cured forms a tough, flexible membrane that seals out moisture. Thermo-Caulk is used as a waterproof sealer for roof seams, termination points, cracks, flashing, vents, skylights, fasteners, parapets, protrusions and duct work. It can also be used with roof fabric for three coursing weak areas of the roof.
FOAM-LOK roofs have all the credentials to support their published performance criteria. They meet or exceed all national building code requirements, including Miami-Dade County.
OUR PRODUCT CREDENTIALS INCLUDE:
UL CLASS A FIRE RATED
LEED FRIENDLY
COOL ROOF RATING COUNCIL RATED
ENERGY STAR RATED
REQUEST A FREE QUOTE!
Lapolla has over 30 years of expertise helping commercial owners.
Contact us today for your free Energy Saving Cool Roof estimate!
